Anybody have any experience with those noisy gear drives? any good? what brands?
Printable View
Anybody have any experience with those noisy gear drives? any good? what brands?
I've had lots of "experience" replacing them with chains when they quit working, does that count? You couldn't give me a set.
They create some very nasty harmonics in the engine that will pound valve trains to pieces... I'll take a good double roller chain any day.
OH NO!!Quote:
Originally Posted by gottabuild1
Here we go again on gear drives.:eek:
Advice on gear drives - don't. Really . . . . don't.
Another point a guy brought up at coffee the other day against gear drives, all those nasty old harmonics must also transfer into the distributor and eventually start pounding all those neat little electronic gizmo's apart....Whatcha think????
that is what i was thinking, thanks for the info, would love to go the jessel belt drive route but thats alot of mony:eek:
Grumpy Jenkins used to run the nylon/plastic tooth stock chev type stuff
Dampened out the dpark scatter caused by the harmonics
Course he changed them every night
Jerry
i hope you was not thinking of one for your 632?:3dSMILE: i will not put one on or build any engines with one. like said there great for transfer harmonic thru the valve train can you say busted springs .just buy a good chain set like a rollmaster and call it good .if you want a jessel i maybe have a good used oneQuote:
Originally Posted by gottabuild1
yes he did they used a wide tooth one i think ? you can not get them any more less new old stock GMQuote:
Originally Posted by jerry clayton
hey you.. when am i getting the slant 6:3dSMILE:i have some 4.500 od sleeves for it. i was thinking run the block dry filler her up to the top of the deck with block rock :whacked:Quote:
Originally Posted by erik erikson
You will get it soon.Quote:
Originally Posted by pat mccarthy
I still am doing all the CNC work on the billet alu. head.
Now where did I put those 2.30 intake valves??:whacked:
have some nice tit 2.400 big chiefs i will just trim them down to 2.300 :3dSMILE:may have to re cut the keeper groove no big deal less you want to double stackup the valve springs :whacked:Quote:
Originally Posted by erik erikson
dont buy a gear drive, get a tru dbl roller or belt
What i really want is the jessel front drive, comes with the belt drive and front drive distributor that runs off of the belt drive, also have been looking at a crank trigger ignition, i allready have a 7AL3 box, i think that is what it is if i remember right, and it can be used with the msd crank trigger ignition, anybody ever run a crank trigger? what ahppens with the internals in the distributor?