timing order swap

Quote:

---

Originally Posted by pat mccarthy

my set up mic only will work on 4.310 and 4.600+:LOL: no dave 540 is ok but 555/565 sounds better and even better is 582:3dSMILE: or i can sell you my 632 donovan flat top engine can you say pump gas engine :3dSMILE:

---

Man, I sure am going to have to get a ton of money for my poor old pickup to afford all this, huh??? Besides, thanks to Jerry I have to put my triangulated 4 bar back on the shelf and build a real 4 link!!!!

PS--I was looking at some of the 632 stuff....NEAT!!!!!

When it's all done (raced) and sold, hope my mega inch Ford draws the same enthusiasm and expertise!!!! Still don't have a good plan in place for it----any block ideas? Gotta be bigger then your new one, Pat!!!!!:LOL: :LOL: :LOL:

ahh dont need to go that big jeez............

neat jerry i pick up my first bowtie block in 88or89 had diamond do the block and head work i used the w port 861 heads sold it to some kids and they let the block freeze:(

it don't get cold enough in the trailer to freeze, does it????or garage???I had a guy bring an antique tractor engine by today and he almost cried when I showed him the cracks in his head/block---didn't even unload them

well i could sell you the 734 just put some ford covers on it there is nothing thats chevy on it any ways other then the bolt platterns on the trans and water pump:3dSMILE:

Quote:

---

Originally Posted by gassersrule_196

ahh dont need to go that big jeez............

---

The only thing better then a lot of cubic inches is a lot more cubic inches!!!!!

Quote:

---

Originally Posted by Dave Severson

The only thing better then a lot of cubic inches is a lot more cubic inches!!!!!

---

AMEN them big engines still make big TQ on pump fuel to:3dSMILE:

better get back on subject or get time off !!!!

What I should do is just put a roller cammed 383 small block in it and sell it.... Getting anxious to get back on the Ranchero anyhow.... Don't know if the extra bucks to build a real engine would increase the resale enough to justify it......

probably not

Quote:

---

Originally Posted by Dave Severson

What I should do is just put a roller cammed 383 small block in it and sell it.... Getting anxious to get back on the Ranchero anyhow.... Don't know if the extra bucks to build a real engine would increase the resale enough to justify it......

---

355 chevy if it was mine it would be a bbc i just have stuff to build a low buck 496 or 454 but with fuel the way it is i think it would be hard to build and sell a car right now it would be better to sell it to someone with a option of engines ? get it all most done and sell it as turn key with color option and engine option???

Quote:

---

Originally Posted by pat mccarthy

355 chevy if it was mine it would be a bbc i just have stuff to build a low buck 496 or 454 but with fuel the way it is i think it would be hard to build and sell a car right now it would be better to sell it to someone with a option of engines ? get it all most done and sell it as turn key with color option and engine option???

---

Hmmmm... Dang good idea Pat!!!! Then finish the car with somebody else's money.... Wonder how and where to advertise a deal like that??? The car is genuinely unique!!!! Should bring some good $$$$$$....

Quote:

---

Originally Posted by Dave Severson

Hmmmm... Dang good idea Pat!!!! Then finish the car with somebody else's money.... Wonder how and where to advertise a deal like that??? The car is genuinely unique!!!! Should bring some good $$$$$$....

---

i have seen this done on e-bay on engine s i can not say if it would work ?

Hmmmm. saw that one too.... I'm concerned that it would end up just looking like another project car....then everyone thinks they should be able to steal it....