Printable View
its funny i started my project and discovered my crane roller rocker was missing the roller and another one was comming apart. who knows how long its been like that. i havant checked them all summer. i havant been on it for a few days but hoppefully the stuffsdiidt make it past the valley i have screen brazed in it, dont worry im going to search everything. what rockers would be the best for the buck anyone use comp magnum?
Well I don't do best for the buck... I'm running Crowers now (pat's suggestion). I was running comp magnums until one busted at the trunion... Both are steel not aluminum
Two cents
-Chris
i'll look into them ive never tried anything crower or isky and pat seems like the man.
crower are very good there other makes out there that work ok to scorpoin/howards .cranegolds/lunati as well as the harland sharps hold up well the crower would be not a cheap rocker but are very nice for a stud mounted rocker arm the others i have used to .your going to want to do a mild lift check for the right size push rods
I've run the Crane golds but these are forged stainless from Crower and are much tougher .............
Kitz