Hybrid View
-
09-01-2009 12:45 PM #1
454 block with no spin on oil filter - help
Greetings and thanks for the response.
I have a 454 block from an 85 one ton truck. The engine had a oil cooler fitting between the block and oil filter. When I removed the fitting, now there is nothing there for the oil filter to attach to.
What do I need to bolt to the block so that an oil filter can be spun on?
Thanks for the help!
-
09-01-2009 01:07 PM #2
Just go to the local Chevy dealer or salvage yard and get a filter adapter & the 2 bolts that hold it on.
Or....http://www.mrgasket.com/
Mr gasket part # 1272
-
09-01-2009 01:34 PM #3
Thanks
This site is the BEST!
-
09-01-2009 01:39 PM #4
sbc are the same there not hard to findIrish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
You're welcome Mike, glad it worked out for you. Roger, it's taken a few years but my inventory of excess parts has shrunk a fair bit from 1 1/2 garage stalls to about an eight by eight space. ...
1968 Plymouth Valiant 1st Gen HEMI