I am in the process of restoring a 64 impala SS with muncie 4speed- I removed a seized engine from the car that was not original- I replaced it with a 327 300HP out of a 64 impala parts car that ran perfectly but had an auto(Swapped Flywheels) I went to re-install the starter and it does not fit into the bell housing (Hits Fly Wheel). Is it possible that the guy who owned it before me used a larger flywheel? I could not use the starter from the seized Motor because the bolt pattern was different, it appears to fit but only one of the bolt holes line up. Any help on this would be appreciated. Thanks