Results 1 to 3 of 3
LinkBack URL
About LinkBacksHybrid View
-
09-01-2003 12:07 PM #1
CHR Member
- Join Date
- Aug 2003
- Location
- Pilot Point, TX
- Car Year, Make, Model: 82GMC
- Posts
- 28
Head ID
Actually head and block. Anyways I am new to this forum and see there is alot of good info here. I have a chevy small block in my truck and I do not know the size . Why well I had the engine replaced by some one becuase I was injured and could not do it my self. Well I got to thinking maybe they did not put in what I told them they went out of Bussines a month later. So I started looking for block numbers and Have not found any still have to crawl under neath and behind. On the passanger side head I found this 11-7 and under neath it Eagle 1 any ideas?
-
09-01-2003 12:46 PM #2
CHR Member
- Join Date
- Apr 2001
- Location
- Salado
- Car Year, Make, Model: 32, 40 Fords,
- Posts
- 10,891
Okay billy, here's a link to a site to ID your heads. As for the block, sounds like it might be a reman that had original stampings milled off. You'll probably have to zero in by casting number.
http://www.angelfire.com/tx5/randysr...Headguide.htmlYour Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
-
09-01-2003 12:55 PM #3
CHR Member
- Join Date
- Aug 2003
- Location
- Pilot Point, TX
- Car Year, Make, Model: 82GMC
- Posts
- 28
looks like I have 350/350hp heads. thanks that helps
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
We Lost a Good One