Printable View
Hey, I have a 307 block bored over to a 350. I also have two sets of rebuilt heads. The first are casting #14014416 with 1.85 intake/1.5 exaust with 58cc chambers, and the others are casting #3782461 camel humps with the 1.94 intake and 1.5 exaust. Which heads would be better for this block? Thanks.
Danny
My 283 had the 461 cammel humps but were aged. Sat for 20 yrs. Still ran good. had some 305 truck heads prob same as you have (small valve) they had been worked and shaved they run better than the humps. On the 283, (7000rpm). My plan is to spend some money on the humps Port and work maybe and put on later.
Thank you.
How did you bore a 307 to 350?? The 307 has a 283 cylinder bore.
I thought the 461 heads had 2.02 valves?
I TOO would like to know how he made a 350 from a 307 ? Thats one hell of a re-bore job .... NOT
Sorry guys, way to be an asshole cool blue.
Do you think you could express yourself with out using foul language.If you don't know what you have just ask.Please don't make up some crazy story.Quote:
Originally posted by Dan2418
Sorry guys, way to be an asshole cool blue.