Newbie, need advice on short block selection

Printable View

03-20-2006, 11:18 AM
mojogoat

Newbie, need advice on short block selection

Hi folks, I'm replacing the engine on my 1969 chevy 1/2 ton long bed truck. I've already collected all the top end and valve train parts: Vortec heads 64 cc, Comp XE256H-10 cam, roller rockers, headers, performer intake,600 performer carb etc... I was planning on using my existing short block but I would like to drop a complete engine with a rebuilt bottom end. I was thinking of ordering a short block from larrys performance. What do you suggest; 350,383 etc... Cast,hyp,forged ? I apreciate any advice as most of my wrenching has been on harleys and in the shipyard.
03-20-2006, 02:07 PM
erik erikson

Re: Newbie, need advice on short block selection

Quote:

Originally posted by mojogoat
Hi folks, I'm replacing the engine on my 1969 chevy 1/2 ton long bed truck. I've already collected all the top end and valve train parts: Vortec heads 64 cc, Comp XE256H-10 cam, roller rockers, headers, performer intake,600 performer carb etc... I was planning on using my existing short block but I would like to drop a complete engine with a rebuilt bottom end. I was thinking of ordering a short block from larrys performance. What do you suggest; 350,383 etc... Cast,hyp,forged ? I apreciate any advice as most of my wrenching has been on harleys and in the shipyard.

I would build a 383 with the Hypereutectic pistons.Everthing else looks good.
03-20-2006, 02:39 PM
mojogoat

Looking at their add, I could get this and add a preped block for
$349.
383 STROKER SPECIAL LONG ROD
Keith black pistons, sealed power rings, M1-77 Rod and making bearing, resized connection rods, with ARP, bolts, new stoker, crankshaft, new harmonic balancer, new flexplate. ONLY $695.00
Balancing $95.00

Does a long rod help a low rpm build?
03-20-2006, 03:31 PM
erik erikson

Quote:

Originally posted by mojogoat
Looking at their add, I could get this and add a preped block for
$349.
383 STROKER SPECIAL LONG ROD
Keith black pistons, sealed power rings, M1-77 Rod and making bearing, resized connection rods, with ARP, bolts, new stoker, crankshaft, new harmonic balancer, new flexplate. ONLY $695.00
Balancing $95.00

Does a long rod help a low rpm build?

A long rod helps the piston dwell longer at top dead center,reduce's cylinder wall loading and wear,also reduce's piston skirt wear and ring wear.