Thread: chevy 305 rebuild
Hybrid View
-
06-14-2006 06:27 PM #1
chevy 305 rebuild
hey guys,
Ive got a 305 out of a camaro (pre 89) engine is an 88 i believe,,,,ive got no carb on it, i was just wondering if there's anyway to find out the carb that fits from the intake? i bought the engine complete and naked at the same time,heads intake block all nice, ive got no alternator (or braket either for that matter) no carb or oil pump...just wondering how i cand out the right parts that fit...thanks alot
-
06-15-2006 08:57 AM #2
hey is that goin in your firebird? i bought my firebird with a 305 in it and put an edelbrock performer rpm carb on it and it fit fine. you got to make sure its for a v-8 and the rest is up to you. If you like you can get a holley or some other also go to summitracing.com and go to their store and they got crap loads of stuff for everything like oil pumps, alt brackets etc....No body messes with the Night Rider
-
06-15-2006 10:49 AM #3
Its gunna take longer than u thought and its gunna cost more too(plan ahead!)
-
06-15-2006 10:51 AM #4
Its gunna take longer than u thought and its gunna cost more too(plan ahead!)
-
06-15-2006 10:53 AM #5
Its gunna take longer than u thought and its gunna cost more too(plan ahead!)
-
06-15-2006 10:54 AM #6
Its gunna take longer than u thought and its gunna cost more too(plan ahead!)
-
06-15-2006 12:05 PM #7
its some good stuffNo body messes with the Night Rider
-
06-23-2006 11:08 PM #8
thanks guys
Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
We Lost a Good One