Thread: Motor talk
Results 1 to 1 of 1
LinkBack URL
About LinkBacks-
06-18-2006 03:32 PM #1
CHR Member
- Join Date
- Oct 2005
- Location
- Huntsville
- Posts
- 18
Motor talk
need a little input on my motor. the cam is already installed so this would be a topend budget build here is the setup
The setup would be
Vortec heads upgraded 550 lift
edelbrock rpm cam 234/244 @050 488/510 lift
rpm air gap intake
670 holley street avenger
attached is the pic of the bottom end i was told on the forum here depending on what head gasket i go with it should be about 9.5 to9.7 compression
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
We Lost a Good One