i was wondering if it might be possible to put a hilborn injection on a 94 lt1? i know that the angle of the heads are different but i wasnt sure if it would be possible? and what would have to be done???
thanks
harmon
Printable View
i was wondering if it might be possible to put a hilborn injection on a 94 lt1? i know that the angle of the heads are different but i wasnt sure if it would be possible? and what would have to be done???
thanks
harmon
Sure, it can be done. Mechanical Fuel Injection on the street is one big hassle.... tried it. Got it to work good, but lots of messing around with primer system, idle and mixture settings, hi speed bypass, etc.
If I do it again, this is the way I'm going to go. For just pure shock value, those 8 big Hillborn stacks coming off the top of the motor do look nice!!!!
how exactly does Hilborn MFI work? does it use like a cam to open up injectors? have never looked at 1 up close. running a Megasquirt I with the EFI hilborn seems like it would be the easiest, MSII tuning program requires a little programming to " tune it " for the box you have, because there is MS 1 and MS 2 and both have 3 versions, 1, 2.2 and 3.0 but all directions are on the net.