http://cgi.ebay.com/ebaymotors/ws/eB...category=33741

http://cgi.ebay.com/ebaymotors/ws/eB...category=33741

http://cgi.ebay.com/ebaymotors/ws/eB...category=33741

http://cgi.ebay.com/ebaymotors/ws/eB...category=33741

http://cgi.ebay.com/ebaymotors/ws/eB...category=33741


Look just watch ebay.com!!!


You can get an old GMC blower (4-71/6-71/8-71/10-71.....) for like 100 bucks or so, then buy a rebuild kit for it off ebay, for around another $65 or so (there is a guy that sells them all the time), and then pick up an intake manifold to mount what ever blower to your small block. Then find a new snout, idler pully, front/rear cover, and I think that is it. And you have pretty much a hole blower set up for less than $500 bucks. But you have to upgrade you fuel, and do alot of other crap to prepare your engine to support the blower.


THE ANSWER IS EBAY!!!!! You'll find every part you need for DIRT CHEAP if you are patient and watch for about a month. I'm putting an entire turbo stystem together on my car (a 7MGTE, which is a toyota supra engine). For less than $800 dollars so far. Were as if I were to buy all the parts new, it would probably cost me over 2,000 bucks!