Printable View
lookin for some advice help suggestions..on a cam.....i have a 5.7 out of a 91 police car has factory flat tops gonna put a set of world product 170cc 2.02/1.06 heads carbed going to run a 400th..factory stall....not gonna be street driven..not sure compression ratio.... been looking at zz4 and lt4 hot cams...so got any advice....
Not gonna be street driven. OK, where will it be driven?Quote:
Originally Posted by bones113
Can't intelligently choose a cam without knowing the static compression ratio.
Factory stall won't take much cam and "not much cam" won't take much static compression ratio.
Stop looking at cams until you know how to figure SCR.
You'll need:
1. cylinder volume in cc's
2. chamber volume in cc's
3. piston crown volume in cc's
4. piston deck height volume in cc's
5. head gasket volume in cc's
Is this a roller cam block?
heads 76cc combustion..... 170ccintake runners...felpro 1003 head gasket 9.1cc....yes its roller block....has factory flat top pistons...think compression will be close to 8.81-9.5......actually gonna be in a derby car....gonna also be runnig a 513 gear