Thread: 350 small block
Results 1 to 3 of 3
LinkBack URL
About LinkBacksHybrid View
-
03-17-2004 07:01 PM #1
CHR Member
- Join Date
- Mar 2004
- Location
- wallingford
- Car Year, Make, Model: 88 firebird
- Posts
- 3
350 sb cylinder head problems
i have a freshly machined 350 4 bolt main with flat top hyperutectik pistons and have a set of 305 heads that are 64cc's 194 150 valves. i was waondering if they will work or will the compression be out of control. i talked to several people at summit and they told me that they will work, along with some other machine shops, but the gentlemen at the machine shop that did my block seem to think that they will not work, there are 4 valve reliefs,. tell me what to do ...Last edited by kjm71181; 03-17-2004 at 07:09 PM.
-
03-17-2004 07:32 PM #2
CHR Member
- Join Date
- Dec 2003
- Location
- Chwk
- Car Year, Make, Model: 86 S-15 Jimmy sb 400
- Posts
- 579
Your compression wil be around 9.8:1 depending on whether you have the block decked or not. So, yes they will workObjects in my rear view mirror are a good thing unless,.... they have red and blue lights flashing.
-
03-18-2004 01:35 PM #3
Registered User
- Join Date
- Mar 2004
- Location
- hillsboro
- Car Year, Make, Model: 87 Formula 355ci
- Posts
- 1
I have the same setup in my formula. You will have no problems, as long as your block & heads have not been decked too much.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
In our neighborhood, 2 blocks down the hill was a gas station that (to me) all the cool car guys hung out there. 32 coupes, 33 & 34 Fords as well, a sweet 56 Ford Beach wagon that was setup gasser...
How did you get hooked on cars?