hey guys, pulled my motor out of the camaro. previous owner starved it of oil i believe. pickup was laying in bottom of pan. wristpins pretty much welded them selves per say to the pistons. i couldn't even move any besides one on the rod!. anyway it was already bored 40 over. so i have some questions on the build. its a straight street motor no strip time will be on it. don't plan on revving the crap out of it..

the guy building my motor is getting all the bottom end im not sure on brand yet, will update with that when find out.

so so far its going to be
3970010 block 4 bolt main.
going 60 over
new pistons i know they will be hypereuretic.
new crank rods bearings

pretty much my question is which intake and cam do you guys think will be best with AFR eliminators either 180 or 195.
im looking to be close to 400 hp thats my goal. need input for a good cam and intake to match up with the heads thanks!