working on my 3window

Ok so i dont have it yet but i am working on the drive train and all that stuff i can get before it gets to me in feb or march.
I want to put in heated seats for my back.
Who makes them?
And then what wiering kit should i get?
I want heat and a/c , radio . wipers,head lights and inside light , Brake light. elec fan,and etc.
Who make a good kit that i can understand.
Elec is not my thing?
Should i do a w/g seat or a van seat?
I want the seat to move back and forth.
I have all my drive train getting a class 3 frame and body ravon.
Iwill have 5k left to get it running.
i hope i have most the big stuff.
Let me know what i can buy now and have ready for the car
please tell me the maker and how much if you know.
THANKS for all the help Dave

Painless makes a good wiring harness, Dave. All the wires are labeled and it even comes with instructions!! I'm not the best on electrical either and I can make it through one of their installs.....

what size do i need a 15 or 20?

you will need a fuse for each circuit. so you'll have to start counting. ignition,ac, heat,stereo, headlights and taillights, and all the other stuff you will be installing. its best to have everything fused. and if you buy the 20 circuit. if you don't use it now you might later. it sounds like you will have lots of circuits running. good luck jason

I have a Glide bench seat in my deuce and like it a lot but don't buy their foam kit. If you want you can have mine to fab it if you want--it is not good enough quality foam to use in a finished seat, and I used it basically to have something to sit on while I drove it to work out the bugs. As for wiring, I used Centech. Like Painless, all the wires are labeled and the instructions are very thorough. I have had no problems with the wiring. Everything worked when I started it up for the first time. Their tech support guy is a street rodder, too.

www.kwikwire.com
That is who I used and I am very pleased.
Very neat and easy to use.

I used American Autowire for my 34 3 window. Very easy, every circuit is in a separate package, with a couple pages of instructions. Once you finish that circuit, you open the next package. I used Painless on my Cobra, and it was much harder. The 3 window has more circuits, but was much easier.

What I like about American Autowire is they give you color wiring diagrams which I find very helpful.

I also used American Autowire on my '59 Apache...Highly recommended...very easy to work with and understand, good quality, and very helpful tech support (if you need it).

can i get a link?
So with all the big stuff paid for do you all think i can finish this on 5k?
Thanks Dave
i will paint it my self

what do you have?
- radiator
-electric fan
-headlites
-bumpers
- overflow tank
-hoses windshield
-wiring harness,ignition,headlite switch
-ac/heater line kit
- wiper motors and arms,blades
-grille shell
-insert
-hood supports latches
-interior,exterior door handles
-window crank handles
-interior lites
-gauges,senders etc etc
-steering column
-steering wheel + hub adaptor
- brake and gas pedals + e-brake lever
- driveshaft
- 3rd brake lite
- tailites liscence plate lite
-dimmer switch ??
-cables,throttle.kickdown.speedo,e-brake, emergency escape
-exhaust
-gas tank + cap

here is a quick list that you are going to have to address,It gets worse if you plan on having a little bling bling.They say 32,33,34`s are the most expensive to build.I can write this from experience as I have bought all those parts for my 33 and I still have quite a bit of glass work to do cause its an older body and never built.Don`t want to discourage you cause they are still the coolests cars on the road,just a little heads up,good luck and remember there is qiute a few rod builders on this site with lots of experience and are ready to help again Good Luck








:p

what do you have?
350 CRATE ENG COMPLET FLEX TO PAN TO CARB
700r4
YES--- radiator
NO---electric fan
YES---headlites
NOT RUNNING THEM---bumpers
DO I NEED ONE?- overflow tank
YES-- windshield
NO---wiring harness,ignition,headlite switch
NO---ac/heater line kit
-NO--- wiper motors and arms,blades
YES----grille shell
YES---insert
YES---hood supports latches
YES---interior,exterior door handles
YES---Window crank handles
YES---interior lites
YES----gauges,senders etc etc
NO---steering column
YES---steering wheel + hub adaptor
NO--- brake and gas pedals
NO--- driveshaft
DONT WANT ONE- 3rd brake lite
YES--- tailites liscence plate lite
YES---dimmer switch ??
NO--cables,throttle.kickdown.speedo,
NO---exhaust WILL RUN LIME FIRE LAKE TYPE
YES---gas tank + cap


WELL THATS WHAT I HAVE SO FAR.
DO YOU THINK I WILL MAKE IT?? ON 5K
thanks for all the good help guys

Right on! Most guys building rods end up paying for big bucks for shipping,looks like thats money you will save.I have to agree with Rum Rumm on the Glide seat foam. I bought my seat with, but am using a "mexican blanket" for a couple "shake down years" then will change out the foam. And will also be running with a base coat for a few years til momma forgets how much we have spent on it and lets me get interior done and also painted.You sound like you have thought this through and also come across as pretty resoucefull so all I can say is GO FOR IT:LOL:

WELL I AM NOT NEW TO CARS BUT I HAVE BENN BUILDING vwS FOR TO MANY YEARS NOW! I HAVE NOT HAD A V8 IN A LONG TIME
HERE IS THE LAST VW I DID I WAS IN HOT VW AUG OF 2005

$5K I would say no..... there are so many things that will cost yuo $20 here and there it will add up. Also you will have about a $1500 in paint supplies even if you are doing it yourself.
Not sure what all you are doing or how far you want to take it but I have everything but glass and I am $35k plus my time.
If I do anything with paint such as flames or graphics that I cant or dont want to do myself I will have another $5k in it.
Good luck with your build but I am finding out that this is not as cheap as I was hoping for.
But then again we might want different results

why not put a v8 in that one:D :3dSMILE: :D

I am going singel stage black and traditional flames then satin clear coat it to burry the pin striping and flames in.

Hey anyone running a set of limefire lake headers on a 3 window?
Do they get in the way of getting out?
And is there a cermic coating in white?

columbia coatings has ceramic coating in white, and several others colors.

http://www.columbiacoatings.com/1024...5erfrg5467.htm

Who has the best price on American Autowire ?
Would i need a 15 or a 22?
And are the wiers all marked on them to say what they are every 6 in ro so?

Well i just got my American Autowire 22 man it looks Hard!!
But i will read it 10 time before the car ever gets here. That should help. Oh and i got some adapters to go from center bolt vlave covers to old type fined valve covers. So now i can run the Cal customs 7 fin covers i have.
That should look bettr man the look of center bolts is not good.
So next is the seat and the heaters for it.
Hey if i get a power track from the junk yard do you think i can make it fit the wise guy or tea seat? They want to much for power for me.

Davyboy, I just ordered a bench seat from Wiseguys for my '32. It was $720 {app.} for the seat & foam straight from Wiseguys. After I ordered it I saw that Street Rods by Michael sells the Wiseguy seats cheaper. But you might want to do a search under my name {billlsbird} and check out the replys that I got on seat questions. A bunch of info with pictures on using junk yard seats. What fits, what doesn't & such. VERY informative to say the least.
Also remember; fuel pump & lines & fittings & regulator. Fuel cell or original tank? Gauges? Transmission shifter? ... Bill

Quote:

---

Originally posted by daveyboy1956
Hey anyone running a set of limefire lake headers on a 3 window?
Do they get in the way of getting out?
And is there a cermic coating in white?

---

.....no limefire headers don't get in the way when you get out. Go to carnut.com....[/url] Then click on the ' index of picture's' link that's on the right side of the page. Then to 'Ford', then to '1932', then under 3 window click 'chopped highboy' and there are hundreds of pictures.... Bill

link please i cant find it

Quote:

---

Originally posted by daveyboy1956
link please i cant find it

---

www.carnut.com