-
Yo Rocknrod! Another thing I forgot to mention - when I got the body on the frame and my Tanks steel tank bolted up back there I noticed that there's about 1 3/8" gap between the bottom of the body and the gas tank! I sent them an E-mail at NAM about it and Ed phoned me. Seems there are "problems with some frames" where the rear frame horns after years of use/abuse tend to drop and give a wrong build to a body if it's built on a frame like this! Well MY frame is new and using Hot Rods and Horsepower rails, the same as AS, and everything measures right - but even Ed said they're looking at redoing the frame they use to build on after talking to a few "knowlegable people"! Hate to say it but you might be looking at shimming up your gas tank like I'm going to do to mine!!:( Another thing to watch for is the trans tunnel - mines off set to the passengers side a bit and kind of a weird shape, not like the 1/2 circle it should be! It clears the 77 I'm using okay, but it's just not right! Fun eh!:mad: Drop me an E-mail at deuceguy@shaw.ca if you want sometime! I've taken pictures of all these things and I'm sending one of each to the boys at NAM.
-
The Gap on the first body I had was tight. However the tranny tunnel had that offset thing going too, so I had to cut it out and re-glass it there.
I think I will FEDEX them a letter in the AM and voice my concerns. Cause your right, we are paying top dollar for this stuff and should NOT be unhappy.
-
Hey Rocknrod, did you get the pics etc I sent you? Didn't hear back and we've had trouble with our ISP lately!:mad:
