Printable View
Can anyone give me any ideas for "bobbing" the rear frame rails and adding a roll pan to my 32 3 window coupe?
I would like to eliminate the exposed tank and frame rail sections from the rear of my Gibbons bodied 32. I would presume the only option would be the installation of a fuel cell in the trunk 0 so much for the rumble seat idea.
Does anyone know of a pre-formed fiberglass piece to fill the area for this type of modification? Any pictures would help.
Thanks!
I have a 32 5w that is pro streeted. It had a small cell when I got it.I had a 15 gal. tank made that fit between the rails in the back.It has a lip at the top.It is even with the trunk floor like an older Mustang tank.
use cold rolled steel, durable, shapeable, cuttable and fairly cheap
Thanks for the advice.
Does anyone have any pictures of a 34 Coupe with a rolled rear pan they can share?
I just can't bring myself to continue the project with the fuel tank protrusion out back**)
I did not know that but, I was not suggesting make the tank out of cold rolled steel, I was suggesting him to make the skid plate thing he wanted out of that instead of buying a pre fab fiberglass one, i figure it's cheaper and stronger.Quote:
Originally posted by Streets
Matt...
Did you know that steel gas tanks all have a 2 mil thickness of pure Silver inside the tank to ward off corrosion and leaks?? :LOL:
Hello Rocks, welcome to CHR , I'm building a 32 3 Window also and in reference to your questions, if you bob the frame horns the tank has to go elsewhere. Most Rodders mount the in the trunk behind the seat , there are a lot of Tank mfg's out there that'll make a custom tank, normally the battery will go alongside the tank, average will be 8"d X21"h X 28" wide, this will give you 20gal, a friend of mine makes tanks and other streed rod parts you may want to check him out, http://www.kustomtanks.com/. his name is Cecil Pacetti in Ormond Beach Fl. he'll make it to you spec's , steel, alum. or S.S. , and does great work too. who's body are you using ? and where is Glenwood ? Good Luck !
Rocks ; OOP'S a Gibbons body , I knew that , do you like it so far ? Gibbons also has a rolled pan available, as do other MFG's but some have to be modified, Downs also makes several , different depths. Still wondering where Glenwood is ?
I'm just about finished with my deuce roadster. I have a rolled fiberglass pan on the fiberglass body in hopes of one day having a quick change peeking out from under it. I used a Tanks, Inc 15 gallion tank that is available for $225.00 from Parr and a lot of other shops. It fits great behind the seat and still leaves a nice size trunk. I put a locking aluminum quick release gas filler on the deck behind the cockpit. I'd attached a picture or two if I knew how.