Printable View
Is there a prefered or recommended bolt pattern for wheels?
I am in the planning stages for a 32 3W. I see axles advertized with cast iron rotors with 4.5" Ford and 4.75" Chev bolt circle. I plan on using a 66 - 77 Bronco 9" rear end with Explorer disc brakes. I am still missing some details on bolt pattern for wheels.
I just went thru buying wheels for mine and I found I had more wheel options with a chev. bolt pattern. like different back spacing and such.
It depends ...Quote:
Originally Posted by florida
The Bronco will have the Old Ford car ( pre 49 ) and later model Ford F-1 and F-100 wheel pattern. It is 5 lugs on a 5 and 1/2 inch bolt circle. Commonly referred to as 5 on 5.5
Ford cars from 49 until much later have the 5 on 4.5
Chevrolet cars have the 5 on 4.75
IF you want the old style wheels for your 32 ... that are so popular right now ...
http://hotrodders.com/journal_photos...2316223340.jpg
You can be in LUCK ... because stock early 50's F1 and F-100 stock rims have the 5 on 5.5 wheel bolt pattern. I have stock 56 F-100 brakes on my 32 roadster with a Bronco rear end ... both the front and rear pattern are 5.5 wheel bolt pattern.
If you want some more modern wheels ... the 5 on 4.5 wheel bolt pattern is very popular and has a wide selection of wheels and sizes available.
The BRONCO rear will have the 5 on 5.5 pattern.
and the Explorer rotors will not fit without redrilling the pattern.
Also ... you can have two different wheel axle bearings sizes on the Bronco rear end. Small or Large. I do not know which pattern ( if either ) the Explorer disc brake mounting brackets will fit. See the chart below :) The Explorer should be a 8.8 Ford rear ...
http://www.hotrodheaven.com/tech/bra...rearflange.gif