32 Roadster Seat

Ii have a Down's 32 Roadster, 2" longer than stock I believe, and since I am 6'4' and need all the leg room that I can get, does anyone make a bench seat frame that will go under the rear lip or will I have to get a stock height frame and cut it down? can anyone advise me on this?
Thanks

I am same size as you my friend and I have a Show Me Rod and Custom frame and body (two inch stretch). I am using a Glide seat and it works great. You should not have any trouble. There on sale right now also.

Do you know which one you used? 4" or 6" rise, stock height back or chopped 2", sliders or fixed, etc
Thanks

Stock height, fixed no riser.

Thanks for your help

I use a bench seat from So-Cal Speed shop. Fixed- bolted direct to floor, fits under the body. I'm 6'1", stock length repro steel body.

The middle bench seat from a '90s Mopar mini van will also fit very well, you make the riser, do any height and pitch you need.

Thanks for the help

I tried the mopar van seat. Didn't fit. The body sweeps in too much at the bottom in mine.