What can we do with a 360FE for less than $1,300

I am looking to buy a ford truck '67-'75 so I think that it would probably be a FE. What are some good things to do with a running 360 or other FE to make it better spending max $1300?

I am thinking headers, edlebrock intake, high lift short duturation cam for torque.

thanks...

Did the Carter come stock?

EBAY lots of good parts for cheap Edelbrock intakes for as low as $50, carbs, headers, MSD boxes Ebay rocks for motor parts that are used and still in great shape.



Mike...

(just picked up a pair or Holley 450's for $150 tottal on Ebay)

Quote:

---

Originally posted by Huntersbo
I am looking to buy a ford truck '67-'75 so I think that it would probably be a FE. What are some good things to do with a running 360 or other FE to make it better spending max $1300?

I am thinking headers, edlebrock intake, high lift short duturation cam for torque.

thanks...

---

Get a 390 if at all possible. If you have a 360, junk the crank and pistons and replace them with 390 units. And yes, definately headers, intake and cam. I used a Performer cam in a mild 390 with headers and Edelbrock 4bbl and was a HUGE improvement over the stock 2bbl 360. Make sure the exh system is at least 2.25" duals or better.