Ok I am going to be building a 435 stroker out of a man-o-war block.
I need help from anyone to help me pick the right block as far as deck height.
I want to run a hydrallic roller cam and will be running Brodix's sts t1 f std 225. Head info is as followed.

Cubic Inch Compression Camshaft RPM
302 - 440 11.5 minimum Hydrallic roller 3500 - 8000

They are fully cnc ported

Valve size is

2.100 Intake 1.600 exhaust

there are 2 choices and size of springs direct me to the best.
first is 1.470 spring
second is 1.550 spring

Intake port is 225 cc volume port is 64cc

I will be runnin scorpion roller rockers on the heads (thanks for the tip erik erikson) so guys help me figure out i need to finish up my choices so i can start building thanks

And I would like to give a big thanks to techinspector 1 for the choices i mentioned at the beginning of this thread.