Printable View
I have a 1994 Chevy Caprice 350 LT1/ Cop car. I pulled the motor, and I am putting it in my 72 Skylark. My question is, I want to make a 383 stroker, but I am wondering if the fuel injection will work right on the stroker. If is will or wont what should I get, and its cost. I am building a streetRod. I plan on building it the best it can be on pump gas, if that helps. I am a total nub on the EFI. Thanks in advance.
The EFI should work fine. You may want to get larger injectors eventually depending upon how radical you go. The ECU can be programmed for your application with the increased cubic inches.
Pat
there is only so big you can go with the stock tpi system, larger injectors, and mass air sensor, and if you build it to radical, a larger throttle body will be in order, ive got the efi tpi on my stock truck but alot of my friends rod the efi and i am only speaking from what ive seen them do with it.