Results 1 to 3 of 3
LinkBack URL
About LinkBacksHybrid View
-
11-19-2006 09:20 PM #1
Registered User
- Join Date
- Nov 2006
- Location
- Everett
- Posts
- 1
Need HElp/ Fuel Injection questions/
I have a 1994 Chevy Caprice 350 LT1/ Cop car. I pulled the motor, and I am putting it in my 72 Skylark. My question is, I want to make a 383 stroker, but I am wondering if the fuel injection will work right on the stroker. If is will or wont what should I get, and its cost. I am building a streetRod. I plan on building it the best it can be on pump gas, if that helps. I am a total nub on the EFI. Thanks in advance.
-
11-19-2006 09:38 PM #2
CHR Member
- Join Date
- Oct 2003
- Location
- Olivehurst, CA
- Car Year, Make, Model: '53 Studebaker Custom w/LS1
- Posts
- 1,900
The EFI should work fine. You may want to get larger injectors eventually depending upon how radical you go. The ECU can be programmed for your application with the increased cubic inches.
PatOf course, that's just my opinion, I could be wrong!
-
11-19-2006 10:10 PM #3
CHR Member
- Join Date
- Feb 2004
- Location
- dayton
- Car Year, Make, Model: 1948 ford anglia
- Posts
- 978
there is only so big you can go with the stock tpi system, larger injectors, and mass air sensor, and if you build it to radical, a larger throttle body will be in order, ive got the efi tpi on my stock truck but alot of my friends rod the efi and i am only speaking from what ive seen them do with it.
Live everyday like it were your last, someday it will be.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
The first model car I built was a 32 Ford roadster by Revell in the mid 50's.
How did you get hooked on cars?