Thread: Ignition wiring
Results 1 to 5 of 5
LinkBack URL
About LinkBacksHybrid View
-
03-02-2007 03:41 PM #1
CHR Member
- Join Date
- Jan 2004
- Location
- Prattsville
- Car Year, Make, Model: '51 Chevy Fleetline and a Ratrod project
- Posts
- 4,990
Ignition wiring
ok, here's my dileima, I'm putting on a MSD 6 BTM box on my '67 Falcon, using a factory DSII distributor and a 8869 harness for the DSII- MSD connector ( plugs into the factory distributor plug ). that's the easy part. next part is, I need a 12v switched source, and I know my coil wire is my best bet, but it's a resistor wire, and when I checked it, produced 7.2V at idle ( I was having an intermittent problem with the bypass circut, so it wouldn't start, no need for a bypass ne more, so I'm not worried ), not enough for the MSD I don't belive. now, I know that I have to splice b4 the resistor wire, or run a new wire off the ign switch, but... which wire is it? I had every wiring diagram I needed ( even tho it was for a Mustang, Falcon and Mustang harnesses, are the same ) on my computer, but IDK where I put them. I kno I could go the easy way out and get a relay that will act on the low voltage, and wire it in that way but, that's cheap.Last edited by Matt167; 03-02-2007 at 03:44 PM.
You don't know what you've got til it's gone
Matt's 1951 Chevy Fleetline- Driver
1967 Ford Falcon- Sold
1930's styled hand built ratrod project
1974 Volkswagen Super Beetle Wolfsburg Edition- sold
-
03-02-2007 06:01 PM #2
CHR Member/Contributor
- Join Date
- Jul 2003
- Location
- Madison
- Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
- Posts
- 21,160
Just take your test meter, and see which wire on the switch is hot in the run position, connect your new wire to that terminal......Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
03-05-2007 10:50 PM #3
CHR Member
- Join Date
- Jul 2006
- Location
- columbus
- Car Year, Make, Model: 90 Notchback stang, 466 BBF on spray
- Posts
- 46
make sure its also hot during cranking or youll still have starting issues.
-
03-06-2007 03:15 AM #4
CHR Member
- Join Date
- Jan 2004
- Location
- Prattsville
- Car Year, Make, Model: '51 Chevy Fleetline and a Ratrod project
- Posts
- 4,990
I could fix and connect the original bypass to the MSD box switched wire, if it wasn't hot on cranking
Originally Posted by Gearhead559
make sure its also hot during cranking or youll still have starting issues.You don't know what you've got til it's gone
Matt's 1951 Chevy Fleetline- Driver
1967 Ford Falcon- Sold
1930's styled hand built ratrod project
1974 Volkswagen Super Beetle Wolfsburg Edition- sold
-
03-06-2007 06:50 AM #5
CHR Member
- Join Date
- Aug 2003
- Location
- Springfield
- Car Year, Make, Model: '66 Mustang, 76 Corvette
- Posts
- 5,406
Matt, I'll PM you a copy of a 66 Mustang wiring diagram as soon as I get out to the garage.Ken Thomas
NoT FaDe AwaY and the music didn't die
The simplest road is usually the last one sought
Wild Willie & AA/FA's The greatest show in drag racing
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
A travel agent was sitting at his desk when he noticed an elderly couple standing outside, gazing longingly at the posters of dream vacations in the shop window. They looked sweet, and honestly, a...
the Official CHR joke page duel