Thread: Combo Help
Results 1 to 4 of 4
Threaded View
-
08-11-2007 07:50 AM #1
Combo Help
Building a 489" BB Chevy and need to have good vacuum. My combo is 4.280 Bore with a 4.250 stroke. I'm planning on using Edelbrock RPM heads, a Performer RPM dual plane with an 850 Double Pumper. My cam choice is either a Comp Cams Hydraukic Roller with 230/236 @ .050 with.547 lift on int/exh. or a Comp Cams Hydraulic Roller with 244/244 @ .050 and .612/.612 lift.
I need first hand knowledge from anyone who has used either of these cams as to vacuum at idle.
Woukd like to have 14-15 inches at idle. Hell, I'd like to have 14-15 inches period!!
I finally fixed that annoying noise in the car. I just opened the door at 60mph and pushed him out. .
the Official CHR joke page duel