Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 305H cam degree help
          
   
   

Results 1 to 13 of 13

Threaded View

  1. 12-22-2008 10:59 PM #1
    FL_Smokin_PSD
    FL_Smokin_PSD is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Dec 2008
    Location
    palm bay
    Posts
    8

    305H cam degree help

     



    Hey guys, this is my first post, and i really need some help, I have a 350 .30 over. swapped the cam to a 305h and sounds like valves are hitting the psitons. We checked by hand and didnt seem like they were hitting but i started motor and it had a really bad clatter.

    My buddy said he degreed the cam but i didnt see it happen. Last i saw it the marks were dot to dot.

    Could this cause valves to tap pistons? im pretty sure yes but dont want to rip motor apart and be wrong.

    heads are 462624 for a 350 with 1.94 ,1.5 and pistons are flat top
    Last edited by FL_Smokin_PSD; 12-22-2008 at 11:21 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink