Thread: 302 cyl head print (needed!)
Results 1 to 15 of 57
Threaded View
-
11-13-2010 03:03 PM #27
Of course you could do 8 individual ports--I always cut them anyway
Louey--the transfer screws are sort of like set screws with a hardened point that points out and is installed with the tool holder--they come 5 or 6 to a size inside the holder, I will try to find an example
Check McMaster
part number 3385a19Last edited by jerry clayton; 11-13-2010 at 03:08 PM.
Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
We Lost a Good One