Welcome to Club Hot Rod! The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.

» Members from all over the US and the world!
» Help from all over the world for your questions
» Build logs for you and all members
» Blogs
» Image Gallery
» Many thousands of members and hundreds of thousands of posts!

YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show

Thread: 302 cyl head print (needed!)

       Tweet


submit

Results 1 to 15 of 57

LinkBack
- LinkBack URL
- About LinkBacks
Thread Tools
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

Henderlong 302 cyl head print (needed!) 11-09-2010, 07:18 AM

ted dehaan just what in the he double... 11-09-2010, 08:31 AM

rspears First, what is a "Cyl head... 11-09-2010, 08:46 AM

HOSS429 any small block ford exhaust... 11-09-2010, 09:03 AM

Henderlong 302. its a small block ford... 11-09-2010, 09:26 AM

rspears I think most everyone here... 11-09-2010, 09:51 AM

jerry clayton You can go to the site of... 11-09-2010, 11:36 AM

Dano61 from the center of a bolt... 11-17-2010, 12:20 AM

rspears C'mon, the horizontal spacing... 11-17-2010, 02:23 PM

jerry clayton thanks Louey, I had some of... 11-09-2010, 12:19 PM

Itoldyouso I agree with the guys. ... 11-09-2010, 12:26 PM

Henderlong THANK YOU Louey!. you have no... 11-10-2010, 06:55 AM

Henderlong And by reinventing the wheel,... 11-10-2010, 07:04 AM

jerry clayton 2.00/2.38?????are the bolt... 11-10-2010, 07:18 AM

rspears We seem to have a basic... 11-10-2010, 08:18 AM

IC2 Dang - all you needed was a... 11-10-2010, 08:28 AM

rspears :LOL:Amen, brother!!:LOL: And... 11-10-2010, 08:46 AM

Henderlong Sorry about the mis... 11-10-2010, 09:59 AM

robot I think that the reason that... 11-10-2010, 10:20 AM

Henderlong if they are made in the... 11-10-2010, 10:42 AM

robot First of all, if you take a... 11-10-2010, 11:35 AM

rspears From my discussions with the... 11-10-2010, 12:55 PM

Dave Severson From someone who's fabricated... 11-10-2010, 05:42 PM

More replies below current depth...

sfort I think he is talking about... 11-10-2010, 03:28 PM

rspears Yeah, sfort I agree. I would... 11-10-2010, 04:40 PM

vara4 I am not sure what kind of... 11-11-2010, 12:58 AM

HOSS429 i think your`e being over... 11-11-2010, 04:46 PM

Henderlong haha over precise? I have to... 11-11-2010, 05:03 PM

Dave Severson That's all well and good,... 11-11-2010, 05:26 PM

dozer Have any of you heared of... 11-13-2010, 04:39 AM

pat mccarthy i still lay out two... 11-13-2010, 12:25 PM

pat mccarthy herlong must of never used a... 11-13-2010, 06:18 AM

jerry clayton Any more just the cost of... 11-13-2010, 07:14 AM

Dave Severson I use the 3/8" flanges that... 11-13-2010, 02:37 PM

jerry clayton Of course you could do 8... 11-13-2010, 03:03 PM

dozer Transfer screws have threads... 11-15-2010, 05:14 AM

pat mccarthy yep and all the big tube... 11-15-2010, 11:30 AM

jerry clayton OK----put 2 bplts--3/8 with... 11-17-2010, 04:11 PM

rspears Yep, you can scale it either... 11-17-2010, 04:20 PM

jerry clayton And the whole thing of making... 11-18-2010, 10:03 PM

Henderlong Sorry fellas, i'v been busy... 11-22-2010, 08:58 PM

pat mccarthy you may have to make room for... 11-22-2010, 09:20 PM

jerry clayton you need to raise the plate... 11-23-2010, 06:56 AM

Henderlong Ya i know, i changed the... 11-23-2010, 01:57 PM

jerry clayton the portion of the port at... 11-23-2010, 02:13 PM

Henderlong i dont understand what your... 11-25-2010, 11:35 AM

jerry clayton The most flow is out the top... 11-25-2010, 11:48 AM

11-22-2010 09:20 PM #34

pat mccarthy
CHR Member/Contributor

Join Date

Apr 2005

Location

bay city

Posts

10,546

you may have to make room for the lower row of head bolts / studs .that is why i made alot of my flanges

Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

Reply With Quote

« Previous Thread | Next Thread »

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

New Forum Posts
- Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
  
  We Lost a Good One
  
  Yesterday, 09:27 PM
- RIP Mike....prayers to those you left behind. .
  
  We Lost a Good One
  
  Yesterday, 02:07 PM
- Very sad to hear this
  
  We Lost a Good One
  
  Yesterday, 01:06 PM
- I did not know Mike very well, we exchanged some messages from time to time but from what I understand he was a very good man. I was sad to learn about this
  
  We Lost a Good One
  
  Yesterday, 10:40 AM
- I am very sad to post that Mike Frade, Screen Name 34_40, passed away suddenly yesterday, April 4th, 2025, at home in New Mexico. Mike's wife Christine shared that Mike had come in from working in...
  
  We Lost a Good One
  
  Yesterday, 08:59 AM
Everywhere sidebar 1.4.1

Powered by vBulletin™ Version 4.1.3
Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
Tabs System by vbSoporte - vBulletin en Español
vBulletin Styles developed by vBStyles.com

All material found at Club Hot Rod are copyright protected

Links monetized by VigLink