Results 1 to 1 of 1
LinkBack URL
About LinkBacksThreaded View
-
03-29-2011 05:39 PM #1
Registered User
- Join Date
- Mar 2011
- Location
- Fort Worth
- Posts
- 1
bbb
I have a 1969 Nova. I am building a 454 Chevy Budget Motor - just trying to go a little above stock. The motor is from a 1985 RV with 16,000 original miles on it. I would like to run the factory short block.
I purchased a set of freshly machined .781 heads to replace the peanut port heads. I also bought a new .544 .547 comp cam and lifters. I was wondering if the cam lift is going to be too much for the stock valve springs????
I have not purchased my intake or carb - I have been looking to buy them used to save money - but I'm not sure what kind to purchase.
Any information / advice would be greatly appreciated!
Thank you!Last edited by robin.butler611; 03-29-2011 at 06:12 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
We Lost a Good One