Thread: holley 450 carb rebuild
Hybrid View
-
05-17-2016 05:40 PM #1
holley 450 carb rebuild
no gas coming out of the squirters why...?? rebuilt new gaskets i blew air into the passages..has anyone ever taken the squirter off / out ?? is this hole open all the way out to the body where the metering block mounts to, or is there a plug thing in there to restrict the amount of gas going into valvebody. this one is pluged anyone know email me at p_s1005@yahoo.com
-
05-18-2016 07:21 AM #2
either the acc pump diaphragm is broken or the lever is not engaged .
-
05-18-2016 09:54 AM #3
Float bowl gasket backwards? Or even metering plate gasket--------bolt holes will line up but fuel passage holes won't------
The accel pump is without a doubt the simpliest circuit of the carb-----if no flow-no fuel-you did something wrong
-
05-18-2016 12:48 PM #4
found that many times. gasket backwards or wrong gasket. have bought many good carbs for next to nothing because of it .
-
05-18-2016 12:57 PM #5
mmm the gasket lines up but hell i never really looked at it ill check that in the morning. the little accel gasket is new
The first model car I built was a 32 Ford roadster by Revell in the mid 50's.
How did you get hooked on cars?