Quote Originally Posted by 69Bee View Post
Another thing to consider with sleeving all of the holes, is to have the mains align bored or honed. There can be some block/main distortion from all of the added stresses (sleeve interference fit). If you did this in my shop, with or without the sleeving, I would be recommending the align hone anyway. Sleeve first, then align hone to establish main bore roundness and alignment, then square (deck) the block. Once that is done, bore the sleeves so that the holes are perpendicular to the deck.

Now that sounds like the ticket. Seems like you may have done this once or twice lol. Is there any information that I need myself before bringing it to a shop like yourself, or can I bring it to a shop with the idea in mind that I want it to spin 10k and sleeve it and they will know how far they can go in terms of bigger bore and stroke or not so much? In all reality I would like to learn to do the machine work myself but for one the equipment is all kind of expensive and I'm not sure how many blocks I can ruin before I am broke lol. Thank you much for the informative answer tho, best description I have seen of how to do it.