Thread: carb question
Results 1 to 3 of 3
LinkBack URL
About LinkBacksHybrid View
-
12-22-2004 10:20 AM #1
CHR Member
- Join Date
- Dec 2004
- Location
- gold beach
- Car Year, Make, Model: 72 240Z
- Posts
- 10
carb question
I have a BG speed demon mech secondary carb. I bought it from a friend that had it on his show truck. He decided to go edelbrock. Anyway, I am having a problem with the secondary squirter leaking, while running and after shutdown. I have adjusted the float lever and also have removed the bowls and metering blocks but found nothing visibly wrong. Anybody here have any suggestions
-
12-22-2004 11:24 AM #2
CHR Member
- Join Date
- Dec 2004
- Location
- gold beach
- Car Year, Make, Model: 72 240Z
- Posts
- 10
thank you, I have a rebuild kit coming for the carb I will check that needle at that time
-
12-22-2004 04:56 PM #3
CHR Member
- Join Date
- Dec 2004
- Location
- gold beach
- Car Year, Make, Model: 72 240Z
- Posts
- 10
well I have a lot of experience with Holley carbs but was a bit unsure about this Demon. Like I said I bought it from a friend who took it off his show truck. Thanks for the info. I took the float levels down and flushed out any crud that may have been under the squirter check valves... Seems to have done the trick for now..
thanks
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
We Lost a Good One