Thread: Edel Carb Help
Threaded View
-
04-26-2005 04:13 PM #1
Edel Carb Help
Edelbrock Thunder Series AVS 650 cfm carb. Well i thought it might be running a bit rich and dumping too much fuel off the line causing a crappy launch, so i went to adjust it. I turned the fuel/air screw all the way in and the car was still running with little to no change. If i recal right from my manual the car should die then I should turn out a bout 1.5 times until I get a stong idle for a lean mix. Is this correct? the driverside screw did not cause the car to turn off but did have more of an effect on the idle the the passenger side screw, could this be a sign of a problem with the carb or something else? The carb is 2 months old and if its bad I think i have a few calls to make, So anyhelp would be appreciated,Last edited by trenchdog73; 04-26-2005 at 04:39 PM.
I wore a camouflage T-shirt once. The response in the pub was "Oooh, it's a floating head!" .
the Official CHR joke page duel