Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree2Likes
  • 1 Post By 34_40
  • 1 Post By rspears

Thread: 670 Holley fuel question
          
   
   

Reply To Thread
Results 1 to 5 of 5
  1. #1
    39 Chevy is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2010
    Location
    Big Cove
    Car Year, Make, Model: 39 Chevy Sedan
    Posts
    115

    670 Holley fuel question

     



    I have a 670 holley cranks good runs good but in a sharp turn or quick stopping its chokes down like no fuel there. I've checked the site plug and the gas will come out if you just shake it just a little. Looking for some advise.

  2. #2
    34_40's Avatar
    34_40 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    New Bedford
    Car Year, Make, Model: 34 Ford 3W Coupe Replica
    Posts
    14,706

    Ideally, gas should come out of the side plugs without shaking it. Not spilling out or pouring out, but the level should be as high as the side plug. Also check and double check for vacuum leaks. Have you verified how much vacuum the motor makes? With a long piece of hose you can set a gauge up in the car and cruise around and get some readings this can be helpful in a diagnoses.
    glennsexton likes this.

  3. #3
    39 Chevy is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2010
    Location
    Big Cove
    Car Year, Make, Model: 39 Chevy Sedan
    Posts
    115

    Ok, thanks

  4. #4
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    11,152

    Another thought, as your car sits normally is the carb sitting level? I ended up using an aluminum 5 degree spacer, thick side to the rear, to get mine level. Hard to get the float level right if the carbs sitting at a steep angle.
    34_40 likes this.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  5. #5
    39 Chevy is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2010
    Location
    Big Cove
    Car Year, Make, Model: 39 Chevy Sedan
    Posts
    115

    That never crossed my mind. I will check that also

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink