Fired up the Flathead finally videos

Spent the week end and rebuilt a carb for it and then oiled up the cylinders . I rolled it over a bit with the battery . Put the carb on and pouring fuel down barb had it rumbling for a short . This had me get a gas supply to carb took a 1 gal gas can epoxied a nipple into it and walla it will idle . 4 vids start to finish on what took place .

http://rides.webshots.com/video/3009...02070080SgUnnC

http://www.youtube.com/watch?v=2WPavZnqJz0

http://www.youtube.com/watch?v=5xaQBtENgFA

http://rides.webshots.com/video/3065...02070080HPVINF

It purrs like a kitten.:) Sounds great, big step getting it running. :D


Don

Kewl Bobby!!! Need to find a home for that engine.

I did swapping the drive line and suspension for all the sheetmetal work will come back done and in primer . That way all I have to do is 351w it with the 5 spd and 9 inch , get it done a lot faster this way .

Guy is also frenching those Hudson lights in. After and before