Thread: Figuring out which carb to get
Results 1 to 7 of 7
LinkBack URL
About LinkBacksThreaded View
-
06-06-2007 08:36 AM #3
CHR Member
- Join Date
- Mar 2007
- Location
- Mesa
- Posts
- 1,385
Check your manifold, I'll bet it's a spread bore because of the Rochester. The Holley is going to be a square bore and won't mate to the manifold with out an adapter (I don't recommend doing that). Look for a good aftermarket manifold that is a square bore such as a Performer from Edelbrock. Holley has a good one along with Wiend and others. Brake booster to manifold. PCV to base of carb. Simple enough. By the way the secondaries are fed off of the primary venturis. All internal so you don't have to plumb anything.Last edited by nitrowarrior; 06-06-2007 at 08:42 AM.
What if the "Hokey Pokey" is what it's really all about? 
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Sorry for your loss of friend Mike McGee, Shine. Great trans men are few and far between, it seems. Sadly, Mike Frade was only 66 and had been talking about retirement for ten years that I know...
We Lost a Good One