Printable View
I HAVE A 427 THAT I'M REBUILDING AND I'M LOOKING FOR A SINGLE PLANE INTAKE MY CAM IS 621 LIFT 3000-3500 STALL 411 REAREND. I HAVE FOUND 3. OSSY.EDLEBROCK VICTOR,AND ONE FROM DOVE PERFORMANCE. ANYONE HAVE SUGGETIONS. THE GUYS AT DOVE SAY THE OSSY IS BETTER THAN THE VICTOR. OSSY IS A PORT O SONIC.HE SAYS DOVE IS BEST.
I WOULD LIKE SOME INPUT ON CHOOSING AN INTAKE PLEASE HELP!!!!!!!
Dove is a very good intake, works best with their heads. I think you mean an Offy Port-o-sonic, they work fine on the street. If you told us what type of car, what you are going to use it for, and a bit more detail on the engine the input might be a bit more accurate. If this is a stock motor for the street, the factory 4-V intake works great.
How about a SideWinder "They have Big Runners"(428Police Intercepter Intake is almost the same as SideWinder), It will flow and turn RPM's
Just my 2 Cents
IT IS A 66 FAIRLANE,621 SOLID LIFT CAM,FORGED PISTONS12.5 COMPRESION, 3000-3500 STALL, 411 9 INCH, SPORTSMAN FOGGER NOS, NEW BOTTOM END, VALVE TRAIN IS NEW. WEEKEND STREET CAR SOMETIMES ON THE 1/8TH MILE.
OK,,,I saw that...If You dont think it will work(I think it will) Then go with the Dove......
OOO....sorry about that just saw Dave's Answer/Question
THANKS FOR THE HELP. I HAVE SEEN SOME POSTS THAT SAY DOVE HAS POOR QUALITY CONTROL, ANY TRUTH TO THAT. IS THE DOVE BETTER THAN THE EDLEBROCK OR DOES IT REALLY MATTER
I've never had a Dove but All I've heard has been Good..
Are you a Member of FordFE.com ?? If not try there and you can ask all the Questions there and find the Intake there also...
I run the EDLEBROCK RPM but I'm Not running the same RPM's that you are. I Cruz at 3000 RPM's
www.FordFE.com
THANKS
I have run the Dove heads and intake, nothing wrong with their quality control. The setup worked great.
hello; first off you better get a bigger stall or a smaller cam because she's gonna stumble off the line. the tunnel wedge intake would work with that cam. good luck, wayne.
Im going to either buy the edlbrock or the dove what does everyone think the price does not matter only about $75.00 difference
hi again; the edelbrock rpm intake will be a good street intake with the auto and still have good torque. good luck, wayne.
The guys at dove said that the 621 lift cam would work good with a 3000 32000 stall. They also recommened it.
Offy makes a good intake for street. Havn't checked any prices recently though. Last I checked the Offy cams are pretty high. But prob worth it