Champion Aluminum Radiator Opinions for 390

I was looking at purchasing a New 3 Row All Aluminum Pro Series Radiator for my 1967 Ford Fairlane 500 with a 390 and was wondering if anyone had experience with the champion radiator below or a similar one and your opinion of the quality and fit.
Thanks, Josh

Fairlane 1967-69
Mustang 1967-70
Cougar/XR7 1968-70
Ranchero 1967-69

Featuring 12in. Dual Fans Totaling (2800cfm)
With Core Mounting Kit (Will Cool 850hp)

Fits: Big Blocks
390,428 & 429
Also Fits 302 & 351c with 24" core
(Check our store for other applications)

Specifications:
Core Dimensions: 16" high x 24 1/4" wide (3 row core)

Overall Dimensions: 20 13/16" high x 25 5/16" (including brackets)

Upper inlet: 1 1/2" located on passenger side.
Lower outlet: 1 3/4" located on drivers side.
12in Dual Fans (2800cfm Total)

Trans cooler: included
OEM mount system
OEM style brass petcock drain. Not plastic like others sold on eBay
Radiator cap is included

Our radiators are manufactured to high standards of quality and workmanship using a higher grade aluminum than other aluminum radiators sold on eBay,100% welded seams and no epoxy. They come with a lifetime limited warranty and are made to install without modifications using your original mounts and fan shroud giving you the confidence you desire.

Features of our Pro Series All Aluminum Radiator
Higher density core: cooling rows are spaced 3/8" apart: giving you 25% more rows within the core than other aluminum radiators sold on eBay and 35% more rows than OEM copper.
Aluminum dissipates heat more efficiently than copper or brass.
Approximately 1500 more cooling fins than other aluminum radiators and approximately 3000 more than OEM copper radiators.
Lighter weight.
Outperforms other 2 row aluminum as well as 3 and 4 row copper radiators.
High performance appearance.


You get "BIG BLOCK COOLING" and "PEACE OF MIND" when you drive your car with one of our radiators
You could easily spend $600-1,200 for a 3 row radiator of similar quality.


For sale is A Champion Radiator

It's A very high quality brand. Check out the awesome weld job.

"Low Inventory"....... Get one while they last.

100% Money Back Guarantee.

We will exchange or refund 100% of your money (Including All Shipping Costs) If:



· Your radiator does not fit

· Your radiator does not cool your engine

· Your radiator leaks

· Contains manufacture’s defects

· Or for some reason you just do not like it



You can purchase from us without worry because our guarantee gives you unconditional protection.



Our radiators are hand packed in the factory box and Shipped via FedEx. (Hawaii & Alaska Extra)
International Shipments are via USPS Priority Mail International

Sounds like a good unit...three row core and good spacing on the tubes... At least it's welded and not glued together.... Never have ran that particular brand, but I've always been happy with the aluminum radiators that I've ran.....

Me too, I like aluminum. :)

Don

Sounds like a nice radiator. I went with a Northern brand aluminum sold by Mustangs Unlimited. No way a stock replacement but the hose and AT line connections were somewhat close and workable. Upper and lower rad mounts had to be widened and modified. It's 3" wide all around and had to notch the rad support on the top on each side so get a flush fit. It's not recessed for the upper and lower mounts like the oem. But it works great and runs nice and cool. The original shroud does not fit. And with the wider size some clutch fans will be very tight on space. So look at the big picture as to what stock parts and look you want to retain. I've been seeing on the Stang and Cougar forums some of the aftermarket brass and aluminum rads are poorly made. Suffering cooling issues as the end result. But the one your looking at offers a good warranty. Do you have a pic of it?

I also asked if they make a 4 row and they do. It will cool 1000hp and it has polished tanks. I can send you the photos I found if you provide your email address.
Thanks, Josh