Mechanical Roller Cam/Hydraulic roller lifters?

Is this possible? I want the benefits of a hydraulic roller but i can only find 2 made by the same company and they aren't what i want. I thought about getting a mechanical roller but i don't want to deal with the hassle of setting the lash then resetting it every weekend because it will be in my daily driver 73 F100. Then i got to thinking maybe i could just use Hyd roller lifters and have the best of both worlds?

It will be 390 .60 over and i'm shooting for 450hp/500+tq with Edl heads ported/matched and all the forged goodies with a stock crank and 4 bolt main conversion. I don't want to go the stroker route. Don't ask why because i don't know either :LOL:

McDuke.

Don't do that - not always compatable. Sometimes they are OK, but you won't know until you ask the cam company. Right now I have about twenty two hydraulic roller grinds and I am certain that other supplliers have plenty more as well. Hydraulic rollers go away somewhere around 5500-5700 RPM so build the package around that range.

You'll have a hard time hitting your torque goal with a non-stroked 390 unless its really worked over, but the horsepower should be attainable.