Thread: 450 holley carbs
Results 1 to 6 of 6
Threaded View
-
06-01-2016 04:58 PM #1
450 holley carbs
ok one is getting gas to the center squiter the other not.. i tryed changing the front bowl, replacing the rubber diaphragm gasket,, i checked to make sure the gaskets are on right so all holes line up. blew holes out with air. .all clear.
this carb is on the right i have a edlebrock cross ram. rebuilt both carb. they were both doing this at first but one came out of it. after a few days i swaped the bowls just to see what would happen..on each carb..ok so now the left one is working and the right one( this was working before i swapped the bowls not it not.)..i guess the fuel pump is to small to handle both 0.3 - 0.5 mpa shouldnt it be around 7lbs
Looks Factory!!
1968 Plymouth Valiant 1st Gen HEMI