Thread: 1967 Mustang Coupe build

Tweet

Well this project started in 1997 when I got it . I have a few others that side tracked me , like a move also . As with most Mustangs they rust on the inside out . 67mustang 007.jpg67mustang.jpg67mustang 003.jpg67mustang 005.jpg



I could have just patched it and ran , but since panels are so cheap I figured I would make it better then new .

It sat for about 8 years while house projects took some time . I started nipping at it a few years ago getting the drive line back in and moving on its own .

I found it just a little north of me , been in a garage for a few years after the hood launched into the air the guy quit driving it .

Here it is on the second day home , the first day some new feul lines and battery it fired right up . The mice had about a small bucket of corn stored in the exhaust so it took a while to clear it out .



My 2 sons , cleaning , buffing and waxing it all up .




This is how the rear aprons looked after Apollo Hood .



The left torque box and firewall was pretty bad . They make all the right parts to repair any rust out .





After I replaced the parts to the firewall and floor toe pan and the box . .