Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree128Likes

Thread: 1955 Chrysler 331 Hemi build for '34 Plymouth Coupe
          
   
submit
   

Results 16 to 30 of 74

Threaded View

69Bee 1955 Chrysler 331 Hemi build... 04-23-2016, 08:18 PM
69Bee These are going to be a... 04-23-2016, 08:20 PM
69Bee Rocker arm assemblies 04-23-2016, 08:24 PM
69Bee Crankshaft (10/10), rods, and... 04-23-2016, 08:30 PM
69Bee Block and modified water... 04-23-2016, 08:39 PM
chopt50wgn Looks like things are... 04-24-2016, 03:08 AM
34_40 Hello 69Bee, it's good to see... 04-24-2016, 03:43 AM
Mike P Well, let me make an... 04-24-2016, 05:04 AM
techinspector1 I built a 392 in the mid-70's... 04-24-2016, 06:33 AM
Mike P I remember Racer Brown. back... 04-24-2016, 07:01 AM
jerry clayton Guess I'll throw out a couple... 04-24-2016, 07:05 AM
jerry clayton In reply to Mike about push... 04-24-2016, 08:34 AM
69Bee Thanks for the replies guys. ... 04-24-2016, 11:33 AM
techinspector1 Yeah, the manifold was... 04-24-2016, 03:35 PM
jerry clayton Sleeve installer made out of... 04-24-2016, 01:08 PM
69Bee Front axle hub to be exact,... 04-24-2016, 01:27 PM
jerry clayton Loved the 410 Edsel I had in... 04-24-2016, 01:42 PM
techinspector1 Several years ago, I had a... 04-24-2016, 03:29 PM
Mike P On the carb spacers, Tech... 04-25-2016, 05:13 AM
jerry clayton Mike-----I have respect for... 04-25-2016, 06:48 AM
Mike P I'm originally from the Quad... 04-25-2016, 07:20 AM
jerry clayton Early Hemi Rocker Shaft... 04-25-2016, 07:37 AM
40FordDeluxe Very nice build you have... 04-25-2016, 12:15 PM
Mike P “…….That killed my plan of... 04-26-2016, 03:30 AM
40FordDeluxe Mike, those were my thoughts... 04-26-2016, 12:24 PM
Mike P FWIW, if you come across a... 04-26-2016, 01:18 PM
69Bee Got the guides in the heads... 04-30-2016, 05:44 PM
34_40 Man oh man.... that is just... 04-30-2016, 05:53 PM
40FordDeluxe Very nice work sir! 05-04-2016, 01:50 PM
69Bee Started to get the block... 05-04-2016, 08:21 PM
Matthyj Excellent! Keep those pics... 05-05-2016, 09:08 AM
40FordDeluxe Did you have to remove some... 05-05-2016, 11:54 AM
69Bee In my opinion and experience,... 05-05-2016, 08:15 PM
69Bee Align hone completed. Seems... 05-12-2016, 08:28 PM
69Bee Working on the heads, and the... 05-20-2016, 09:12 PM
69Bee Part Two... 05-20-2016, 09:23 PM
34_40 Nice job with the pin. and... 05-21-2016, 03:54 AM
69Bee Block is square now, and... 05-22-2016, 09:07 AM
69Bee I guess I need to clean and... 05-22-2016, 06:22 PM
jerry clayton With that much stuff in the... 05-22-2016, 06:54 PM
69Bee LOL, snow.... I am in SE AZ,... 05-22-2016, 07:23 PM
69Bee Got the block bored to 0.060"... 05-23-2016, 08:38 PM
jerry clayton Makes me want to get going on... 05-24-2016, 07:58 AM
69Bee Finished the valve job today,... 05-24-2016, 08:38 PM
jerry clayton I like the exhaust seats-wish... 05-25-2016, 06:47 AM
40FordDeluxe Very nice work and awesome... 05-25-2016, 01:01 PM
69Bee Intake ports are cleaned up... 05-28-2016, 07:07 PM
edward g. p. Happy happy joy joy. Thank... 05-28-2016, 09:04 PM
69Bee Finished the last 4 exhaust... 05-31-2016, 10:57 PM
Jack F Just my ignorance showing but... 06-01-2016, 06:15 PM
69Bee Without boring it first, you... 06-01-2016, 08:32 PM
jerry clayton Same in my shop--------Like I... 06-02-2016, 06:55 AM
Jack F Thanks guys for the... 06-02-2016, 08:18 AM
69Bee Been a while, but I decked... 12-30-2016, 09:19 AM
techinspector1 Ya know what I like best... 12-31-2016, 11:43 AM
69Bee Thank you Tech, that is just... 12-31-2016, 05:17 PM
69Bee Ok, so a new update on the... 05-17-2018, 08:00 PM
Mike P I asked Dave to let me road... 05-18-2018, 05:24 AM
40FordDeluxe Nice to see you posting again... 05-18-2018, 01:26 PM
69Bee Ok, I decided to move the... 06-01-2018, 09:11 PM
v8nutz That's going to be a nice... 06-02-2018, 02:05 PM
Mike P ".....That's going to be a... 06-02-2018, 05:42 PM
40FordDeluxe Very nice! Are those hot... 06-04-2018, 11:07 AM
69Bee Balance job is back, so some... 06-13-2018, 07:20 PM
69Bee Yes, the stainle$$ plugs are... 06-13-2018, 07:14 PM
40FordDeluxe Oh, so very nice! 06-25-2018, 11:48 AM
69Bee Got all of the pistons in,... 07-14-2018, 10:25 PM
34_40 To much O.D. on that nut? 07-15-2018, 02:21 AM
69Bee Yes, had to remove about... 07-16-2018, 06:38 PM
34_40 Turned it in the lathe?? ... 07-17-2018, 04:53 AM
69Bee Lathe; the 12 point nut... 07-18-2018, 01:29 PM
40FordDeluxe Very nice! It's always... 07-16-2018, 07:48 PM
34_40 TLAR... funny.. I haven't... 07-18-2018, 03:59 PM
RustyBigBlock Are you aware that the... 07-31-2018, 10:54 PM
  1. 04-23-2016 08:18 PM #1
    69Bee's Avatar
    69Bee is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Apr 2016
    Location
    Whetstone
    Posts
    58

    1955 Chrysler 331 Hemi build for '34 Plymouth Coupe

     



    After getting the hemi to the shop, it was time to start cleaning things up, but this time for myself. One head cleaned up just fine, and finished up the block on Friday. It was a little rough, but I think it will work out just fine, especially at the price of replacements, lol. I already rebuilt the rocker assemblies, and they turned out nicely. Well, this is going to be a long thread as I am just getting started.
    Attached Images
    Last edited by 69Bee; 04-23-2016 at 08:33 PM.
    34_40, rspears, 40FordDeluxe and 2 others like this.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink