Wow, that's nice! Is there a reason he went with the 4.6 over a 5.4 ? Just curious, I don't know a lot about them except I've had a few 5.4's in pickups.
Printable View
Wow, that's nice! Is there a reason he went with the 4.6 over a 5.4 ? Just curious, I don't know a lot about them except I've had a few 5.4's in pickups.
He went with the 4.6 because he came across a low mileage car. Knowing what he knows now he would never have put it in. All the add on pieces needed to make it work are expensive especially with are dollar. Could have built a nice Y block for what it cost for the 4.6. Live and learn.
Starting cutting out rust. Got the hinge pillar replaced only because of damage from previous accident the rear floor pan and inner rocker in. Going to be a lot of metal replaced. Car is a lot worse then first thought.Attachment 69648 [ATTACH] 69649[/ATTACH] Attachment 69650
"Car is a lot worse than first thought" , I've never heard those words before :LOL: Fighting rust and damge, that's a fun como. Thanks for the pics of the progress, this will be fun to follow. How much body flexing is there when you cut it apart, even with the braces.
Wow that's a lot of cutting. Where are you getting the replacement parts? Shop built or a donor?
I had considered doing a mod motor for a short time. But it just gets to expensive and no real net gain for what I was after.
Previously order left front floor pan, toe board and floor outer braces also left quarter partials. The rest is going to be made the repo rocker panels are not nice. Would have ordered more floor pans but everything has to come from the US so I'll just make the rest. There is not much available for 55-56 fords.Quote:
Originally Posted by 34_40
The thing about a 4.6 they look good and they are a nice motor but very expensive.
Nice work on the Vic so far! You definitely have your work cut out for you but it looks like you have a handle on it!
Also been working on this car for some time now it's a 1942 Packard Clipper. Finely got the body paint and cut and buffed.Attachment 69654Attachment 69653Attachment 69655Thanks Ryan
So very true!Quote:
Originally Posted by F-350Luoi
Hey, in that bottom picture. It appears that the downspouts are sticking out to far. Be careful around them..8-)
That looks sweet!
More progress.Attachment 69692 Attachment 69693 Attachment 69694
That is looking darn nice!
Thanks Ryan.
Sorry Seth I missed this reply. Welded in bracing before cutting apart and checked door gaps before welding together. Also take a lot of measurements. Yes they are always worse then you think.Quote:
Originally Posted by 53 Chevy5
I agree with Ryan, you're doing some great work. It's coming along very nicely.
