As mentioned we got the BB K member in the red car last weekend. I spent most of the week removing the trunk mounted battery wiring and the Terminator wiring harness from the green car to get it ready to sell with the red car.


z RC2 by M Patterson, on Flickr


This weekend was getting the modified K member in the Green car, the big brown truck came by and dropped off a new set of PST “103” torsion bars and 20:1 steering box so basically the front suspension is done.


Z GC by M Patterson, on Flickr


We’re just about ready to push the red car out of the shop and put it up for sale. We put the hood from the Green car on it and went ahead and changed out the deck lids. The deck lids both need to be stripped down to the bare metal before there painted but the green car’s had been drilled for a power cut off switch which I won’t be needing. In the process of changing the deck lids we found out the torsion bars used to hold the lid up had been improperly installed so we took the time to straighten that out (always a lot of fun).

z RC by M Patterson, on Flickr


With the holiday this week I probably won’t make that much progress but a little down time’s not a bad thing.



.