my first engine is alive

Printable View

09-14-2007, 03:54 PM
BBMonte

my first engine is alive

well it has Bean a wile and u guys helped me work out a lot of bugs and here is a fruits of my labor! the engine Breckin whent well had to add 3 fans to cool the dam thing lol

http://www.youtube.com/watch?v=XmHEccQiu5Q

402 Bord .030 + 408 line holed and decked .010
119CC heads ovel port Milled .005
Nodular Iron Crankshaft "Balanced" good to 6000 6500? RPM
Speed-Pro Power Forged Pistons P/N:TRW-L2328F30 9.5:1
Speed-Pro Plasma-moly piston rings
Elgin 3/8 Push Rods
Eagle "SIR" 5140 Forged I-Beam Rods W 7/16 ARP bolts $200.00
Elgin 21-4N Stainless Valves Intake 2.065 & Exhaust 1.75 vavles
CraneCams 103052 Energizer Cam @ IN216 - EX216 lift .510
CraneCams 13308-16 Valve Springs
CraneCams Push rod guide plats
CraneCams 13744-16 Energizer Full Roller
Professional Products Damper
Scat SFI Flexplate
Melling High Volume Oil Pump
Pioneer rocker studs
Edelbrock Performer EDL-2161 Aluminium Intake
Comp Cams Timing Gear Drive Sets
ARP Main bolts & Head Bolts
Head gaskets "MLS"
Oil Pan 6 quart with pick up
09-14-2007, 06:25 PM
erik erikson

Quote:

Originally Posted by BBMonte

well it has Bean a wile and u guys helped me work out a lot of bugs and here is a fruits of my labor! the engine Breckin whent well had to add 3 fans to cool the dam thing lol

http://www.youtube.com/watch?v=XmHEccQiu5Q

402 Bord .030 + 408 line holed and decked .010
119CC heads ovel port Milled .005
Nodular Iron Crankshaft "Balanced" good to 6000 6500? RPM
Speed-Pro Power Forged Pistons P/N:TRW-L2328F30 9.5:1
Speed-Pro Plasma-moly piston rings
Elgin 3/8 Push Rods
Eagle "SIR" 5140 Forged I-Beam Rods W 7/16 ARP bolts $200.00
Elgin 21-4N Stainless Valves Intake 2.065 & Exhaust 1.75 vavles
CraneCams 103052 Energizer Cam @ IN216 - EX216 lift .510
CraneCams 13308-16 Valve Springs
CraneCams Push rod guide plats
CraneCams 13744-16 Energizer Full Roller
Professional Products Damper
Scat SFI Flexplate
Melling High Volume Oil Pump
Pioneer rocker studs
Edelbrock Performer EDL-2161 Aluminium Intake
Comp Cams Timing Gear Drive Sets
ARP Main bolts & Head Bolts
Head gaskets "MLS"
Oil Pan 6 quart with pick up

I just hope you don't get to much traction.
With the extra torque of the BBC you may just tear the rear end right out.
09-14-2007, 06:43 PM
pat mccarthy

Quote:

Originally Posted by erik erikson

I just hope you don't get to much traction.
With the extra torque of the BBC you may just tear the rear end right out.

yep them big blocks like to find the weak spots and bust things:3dSMILE:
09-14-2007, 06:48 PM
erik erikson

Quote:

Originally Posted by pat mccarthy

yep them big blocks like to find the weak spots and bust things:3dSMILE:

I broke the rear end out of a 85 Monte I had.
It was just a 383 with 400 hp and a 125 shot of N20.
I was launching it at 3,500 rpm's without the bottle.
It just about shoved the spyder gears out the back cover.
It was a long walk home.
09-14-2007, 07:11 PM
pat mccarthy

i had this sound that no one could not tell me what the hell it was. this was when i was a kid sounded like the fly wheel that was crack.i had a 396 bbc in the gto so one day i put it to the floor till it was gone? NO.. big bang.. busted the rear end half :eek: busted some of teeth off the pinion and many off the ring and crack the case from the cover to the front seal and busted up the limit slip all to hell some of the spider teeth fell in to the ring and pinion but i did make it home going about 3 miles a hour :3dSMILE: you could get out a walk faster:LOL:
09-14-2007, 07:32 PM
erik erikson

Quote:

Originally Posted by DennyW

I did that once in my 61, that's right, Chevy. Same thing, 3-5 miles an hour all the way home. No money for tow, and didn't want to leave it on the side of the road. :LOL:

At least you guy's got to drive your car home.
09-14-2007, 07:57 PM
pat mccarthy

i did one that was better then the rear end .i did .it just came to me i had a 55 chevy rear end in the chevy hand my 454 in the 50 was out at 3 am and was thinking OR NOT. i was going to smoke the hell out of the tires .i sat out there on the road it must of been some time could not see any thing out the back of the car but a wall of smoke with the tires just smoking the hell out of them and let off the brake to hold it there then i nail it to the floor put it way WAY over the 6800 rpms AND then SHE Hook :eek: and then snap the drive shaft off i coasted it but the drive shaft was banging on the ground so i was not thinking.. i stuff the drive shaft over the EX that was now bent down BUT burn the hell out of my arm so was to pushing it and now coolet was pouring out of the front of the car but still was pushing the car like hell thinking the cops sure the hell are coming to get me .. got it all most got it home about two blocks had to call for a tow. and for the burn out that would match john force any day cost me ? one rear end . one drive shaft. one rebuild 400 trans .one stall. one radiator .and one fan . and a big burn on my forearm
09-14-2007, 08:24 PM
Dave Severson

Many years ago my nephew did a burn out with his Charger and broke the rear U-joint....He called me to come tow the car home for him (at 3AM). Figured he better get it out of there before somebody showed up and saw the tracks ON THE SIDEWALK!!!!!!!:LOL: :LOL: :LOL: :LOL:
09-14-2007, 08:37 PM
pat mccarthy

Quote:

Originally Posted by Dave Severson

Many years ago my nephew did a burn out with his Charger and broke the rear U-joint....He called me to come tow the car home for him (at 3AM). Figured he better get it out of there before somebody showed up and saw the tracks ON THE SIDEWALK!!!!!!!:LOL: :LOL: :LOL: :LOL:

:HMMM: well i stop with the captain and coke .that is one thing in my life i am glad i stop
09-16-2007, 06:01 AM
BBMonte

yeah the rear end will be on my mind when i drive it so i am going to look for an 8.5" from an olds 442 or buick G/N i am still going back and forth of what trans to go with the 200r4 or the Th350 i like over drive :-)