On the 454 from what I was told .060 Max . The 369/402 and the truck blocks can go more . I did know a guy that made a 440ci out of a 427 BB . But today with all the stroker kits I am sure you can make a much larger engine out of a 396 .
Printable View
On the 454 from what I was told .060 Max . The 369/402 and the truck blocks can go more . I did know a guy that made a 440ci out of a 427 BB . But today with all the stroker kits I am sure you can make a much larger engine out of a 396 .
3700 was all parts and machine work and the price to long block it with a roller and all new part put it on paper and get back to me you would be hard press to copy it for that:LOL: Tango who care s about a 455 :LOL: he said a 402 and they cost abit more for pistons and stock parts would be less then a 496 and alot less cid and the very old tall decks could go over 100 over but not the newer mark 4 tall decks i would not go over 060 and if so it would need to be sonic checked. the 396 truck block are not any thicker then the car blocks the very old 65/67 396/375 hp blocks could go to 4.250+ bore you will have a very hard time finding one .i have bored old early 70s mark 4 454 080 +over before i would go that on a 396 and the 69 396/375 hp i would not go 060 on the one i hadQuote:
Originally Posted by gassersrule_196
so pat, what would it be costing to make a 396/402/427 run some nice low 11's in a 63 nova? thats what im after this is uncharted territory for me. and can you make a tall decker run good? i hear alot of people saying how there trash well you know me i like other peoples trash :D not a every weekend race car and id like to be able to hop in it and drive somewhere <yeah yeah gas mpg oh :eek: > and then go pop 11's, you guys and your pump gas stuff can it be done? without aftermarket heads! was thinking either strip dominator or tunnel ram goal is to drive it to arlington or shelton <maybe even bakersfield> either this year or next for the old time drag show car will have dana 60 <already got with 4:10 posi probably swap that out for some 373's> with 4 speed. <here come the procrastination segment i say this year or next will probably be 2-3 :LOL: >
the hardest part is to put the big block in the chevy II i have done headers for them cars with big blocks in them but 11 should not be to hard in a small ligth car and could be done with a iron head 402 but i would like to see a 454 easier to find the tall deck just would be to hard to fit in the carQuote:
Originally Posted by gassersrule_196
What Pat says times two.Quote:
Originally Posted by pat mccarthy
I.M.O.,if you use a 454 block you might as well build a 496.
car is going to have straight axele <no worrys for clearance :D > erick, BUDGET :D :D just help me build an regular bbc. id be up for a 468 . but the goal is a 427 i sware i hear of guy swapping cranks and making there own poor mans 427 ??
well i concur with my colleague in the rat race business**) if you do this i have alot of very nice used parts i can help you out on like roller cams hippo crower roller lifters and psi springs all this stuff i can save you big$$ onQuote:
Originally Posted by erik erikson
I will do my best to control my-self.Quote:
Originally Posted by gassersrule_196
Pat,he said 11's.Quote:
Originally Posted by pat mccarthy
At this rate he will have a low 10 sec. car.:LOL:
well that would be cool, as of right now the car is being kept at a realtives house till spring when i can do some cleaning and bring it home, but taking notes and learning and collecting parts will make it much easier when it comes home everything will be here at once. like i said, 11's are the goal for when i do wanna go tear it up but id also like it to be able to handle some decent road trips, can you do that on pump gas pat? i just dont know where to start. i keep referring to the older bbc's cause you know me, im a nostalgic :D
Quote:
Originally Posted by erik erikson
:eek: :eek: :eek: see 496 is new to me? man im so stuck 20 years ago :LOL:
the 454 block with a 366/427 crank would be a good way to fly i know guy that have run in the 11s with the chevy II with about this size engine but you want to run pump gas i would build a flat top 468 454 pistons are EZ to find and better on price
well a bottle of octane boost wouldnt burn my spirits either :LOL: well when you put a 366 crank in a 454 whats that turn it into ? man i really need to do my homework, hey at least im willing to listenQuote:
Originally Posted by pat mccarthy
well it hard to tell on the outside how many CID the rat is 396/582 you know i have past off bigger for 396:whacked:
Pat,I was looking at the old PBM catalog.
I think you can build a 496 for about $50 more than a 454.
How long do you think a set of hyper. pistons will last in a low 11 sec. car??
If Scooter had said low 12 sec. car I would say run the hypers. but in a low 11 sec. I am having my doubts.