What planes are these?

Wellll !!! I thought you were a plane guy and you do sound like you know what you are talking about. My comment was simply to be informative of a MISTAKE you made not to be a wise a*$. I was also fine with your post with you spouting off your complete know it all. And weather you looked it up on the net or read about it in some book doesnt make a lot of difference.

I also didn't look it up on the net, and didn't read about it in a book. I actually new that the A10 used a 30MM shell. Your post was fine until that last paragraph you could have keeped that to your self.

Quote:

---

Originally Posted by HemiTCoupe

No! I did not look up this stuff on the internet, I don't need to! ;) I read books on all the planes I build, I build them as close to scale as I can.

Pat

---

What did I say that's wrong? All I said was I read/buy a lot of books on each of the planes I build. I even used a smilling wink in it. ;)
I build most of my Military planes as scale as I can, I don't build all planes to scale, a lot of them only stand off scale. I have a Hawker Hurricane kit that I have not yet read much on. I do know it was a British plane and had a Rolls-Royce motor with a 3 blade prop, and it's a tail drager.

Sorry if it sounds that way, it's not ment to be!

Pat

Hey Pat, out of curiosity, about how many hours in building one of those monster models????? I used to do a bit of RC years ago....nothing near that level!!!!!

Dave,
Well it all depends, does someone want one to look like a particular type plane and fly well or does someone want it to be scale, and harder to fly? ( a thing called scale affects when you make it smaller then full size plane) I use to build non-scale planes for people and would average about $.15-.35 a hour! :eek: But I did it for kids and begginers ;) Most people don't like the true cost to build them! :eek: Just like a hotrod. It's cheaper to buy a built one, then have one built! :HMMM:

If it's a scale plane, I have find & read books with lots of pic's order a kit that is close to what I want, and customize it till it the true shape & size. Then I have to find out if they make the retrack landing gear, or do I need to buy a set and rebuild them to be right for the plane I'm building ,They don't make them for all planes. I paid $300.00 for the set for my F7F Tiger Cat. and thats only the gear it self, not the parts to make them work! I then have to mount motor and the servo's and radio stuff and make sure it all works smooth and the gear work right also, build the cockpit and instruments.
I build the planes out of Balsa wood, then glass over it with I/2 oz cloth and use epoxy, not poly(no stink **) :whacked: venting, or wax to remove if you can't get with out) then sand it smooth as a baby butt & straight! Then mount the engine cowl, and cut what ever holes it needs,then paint everything with auto paint, I don't use decals, I hand paint them on. then clear it with gloss or semi gloss, or flat, which ever it calls for, then set the center of gravity on the main spar (back a little for stunt forward a little for smooth flying)

I guess it's like asking you how long and how much to build your Camaro, before you started. :D You have built many, but not the Camaro yet.

A scale plane can take a easy 4-6 months (I don't work on them 24-7, only evenings & week-ends, just like a car. I work days to pay for them :3dSMILE: ), and a trainer can be built in 3 to7 days. I have built gliders in about 36 hrs