23 "T" Bucket 1/4 scale
Powered by the new Stinger 609 Engine TOTALLY NEW rearend (stainless steel housing with differential) Powder painted steel frame Oil filled shocks Stainless steel exhaust Wire wheels (front) Hallibrand style rear wheels with knockoffs Operating headlights Leather interior and carpet Burled Walnut dash with simulated gauges Windshield Aluminum firewall Stainless steal dropped front axle and multi-leaf springs

Please note that this picture display's the older engine that is no longer in production.



Powered by this Engine yawn

Here is the latest in the Conley line of V-8 engines. It sports the Stinger 609 name badge (6.09 cubic inches or almost 100 cc) and is the culmination of almost 30 years of knowledge gained in the designing and construction of model engines. The new Stinger possesses no parts used in prior V-8 engines.

The bore is 1.00, with a .970 stroke. It weighs about 11.25 pounds and measures 14" long, 6" wide, and 8-1/4" tall. The supercharged version will be about 10" tall. Among the numerous innovative features like large oval shaped intake ports, "D" shaped exhaust ports, and investment cast parts, two bold attributes stand tall: the dry sump pressurized oiling system and a full ignition system. The engine even has a user replaceable oil filter. For those of you who lack familiarity with dry sump oiling, it simply means that oil resides in a holding tank, rather than a conventional oil pan, which circulates throughout the engine. The oil that does collect in the pan is simply pumped back to the holding tank. There are two separate "Gerotor" style pumps to move all the oil. An important side note, my test engine held about 40 lbs oil pressure at idle and 80 lbs oil pressure at 8,000 rpm. The dry sump oiling system not only adds more oil volume but aids in engine cooling. The spark plugs have a 10-40 thread. As always, the new Stinger 609 V-8 will have an electric starter as standard equipment. No hand held electric motors here, or something that fits in a box below the engine, but rather an 12 volt electric motor that comes as standard equipment and is part of the engine. It can be activated manually or via the transmitter on your remote control. The centrifugal clutch and "Zoomie" style exhaust is also included.

Each engine will be fully Dyno tested and adjusted for optimum performance. I am expecting around 6+ hp at 9,000 rpm for the normally aspirated version.



Ready-to-Run Car-> $13350.00