Printable View
well if any one wanted to know what my back looks like now it is much better all the old skin is all most off and it is not leaking any more .there still is abit of some pain there still a white part that must come off but in time it will .this is smaller now but was very close to getting a graff .sorry for a bit of plumers crack burn run down to center of my butt
Yeowww!!
All things considered you're one fortunate guy. Actually looks like it's healing fairly well.
i agree with uncle bob. i hope you got some good meds that help.
Pat, good to see your home. I bet you feel better already. Been on fire a couple times myself, but nothing like that. I'll give ya a free pass on the the A$$ Crack, you've earned that the hard way! Take care, and glad to have you back on the board.
Keith
Pat, I'm really sorry you have had to indure the pain associated with this. I had roughly the same burn up the bottom part of my arm from my wrist to my elbow, with skin flapping down. No fun at all.
You be real careful about keeping that clean and dry and you'll be healed up in no time at all. :3dSMILE:
Richard
Heck Pat,I can feel the heat and pain from here,not good for sure and you are very lucky that the burn/fire didn't reach your neck and hair line. Please look after your self and I will pray for your speedy recovery.
My 'junk' just curled up!!! Owwww
Pat - take REAL good care of that.
Pat I had no idea you were burned to that exstent,I knew it was bad but thats just wicked.Heal and get better call my if you need anything.I'm just over in the north side of the neighborhood.
Wow, sleeping must really be painful. I'm buying some kind of welding jacket after seeing this.
Wow that looks painful.You'll heal ok as like everyone said if you do what the doctors is telling to do.
Pat-promise you will wear your welding jacket or get one.Might be hard for you to understand,but you are so important to all of us.
Take care of yourself,
Gary
All you guys and gals go out and buy welding jackets
well every one buy a welding jacket . i like to think i am a tough nut but this hurts more then when it happened and its going on 3 weeks as for it healing it is looking very good now should of seen it beforeQuote:
Originally Posted by 1gary
Pat,
You've given me the needed push to actually use the leather welding jacket hanging on the bottles! Man, I feel for you! Nothing about burns is good.
Wow Pat you had to be freakin out. I may have missed it. How did it happen?
ouch ouch ouch
Damn that looks sore.:eek: Hurts just looking at it. Hope you've got some good Irish whiskey to dull the pain.:LOL:
Here we go; $25 is cheap protection. Pat, that picture will save a lot of injuries. Thanks for making us aware of what could happen.
http://www.amazon.com/dp/B003ET5FZ4/...SIN=B003ET5FZ4
:eek::eek::CRY: I don't think I could say anything more; I feel for you, man.
dangit boys, that has to hurt!!dadburnit pat.we all wish you the best.you just have be be carefull and give yourself some time. i know its hard to stay down but thats what it takes.
[B]Hey Big Guy!, I go on vacation and come home where I have had three of Pats Rats sent in the past and I am stunned to hear this news!,
I hope u are all right and I am gonna call you from work tomorrow! This board needs to have you, and heck I would be lost without you the machinist/magician who can make anything I send you fly! Get well and recover and this better not be a ploy to get Christmas cards early,,,lol!
seriously. I dont get on here long enough but I do appreciate you and my thoughts and prayers are with you all the way..
Thanks sleeve 396. i was thinking i was just a machine work all the time . maybe just abit worn out and some rust but in still some what working order . but after i got burnt i now know i just a human. this is not a big deal a bump in life s road . i could be dead or burnt up alot more then i was . i am all most heal up now after well over a month time. and one hell of a bill that one or 10 engine s will not cover. just for a $75 job in the shop . heres one thing i think alot about if you work for your self and you can not buy insurance or like me get screwed to the point were you can not buy it any more doing a honest job..:mad: sell drugs .i think i may not be the same baptism by fire so to speak. i have had alot of time to think .maybe to much time . if any of you think this was a dumb thing well maybe i was. but have welded for 30 +years. welded any thing and every thing never had this happen. i always think about were and what when i weld . were sparks could go and have water on hand and fire extinguishers all over my shop after welding or grinding i do not leave for a hour or more .so i know every thing is ok . i just was welding just a small weld over all 5 inch weld on a welding table at 200 amps dc+ 1/4 rod no big deal ?. if you can go thru life never getting burned take my word.. do so
I know with this last post Pat you said your pretty much healed.Just thinking of you this morning and wanted to check in with you about your burns.
well i am about were i was before i was burnt . with the two bad disc s and bad shoulders and fibro i did not need a bad weather indicter but i got another one :D thank god .. mich has such lovely weatherQuote:
Originally Posted by 1gary
Good to hear you're doing OK Pat.
"...... with the two bad disc s and bad shoulders and fibro i did not need a bad weather indicter but i got another one....."
I know what you mean, everytime it gets cold and wet here I'm reminded of every stupid thing I did over the years.
I think they lied to us about the golden year :LOL::LOL:
I'm glad you're doing better, burns sure suck, I've never had anything bigger than a silver dollar, but even something that small the healing process sucks.
I have a nice welding jacket my uncle bought me, still with tags on my hook at the wash sink, because I wanted to keep it nice. stupid! you'd think I'd know better. From now on though I'll wear it.
I'm curious about the fabric, it looks like standard flannel, and not new (the fuzzies on new flannel can be dangerous too) but I wonder if it is a blend and/or stain/water repellant? I have a theory about those things is the reason I ask.
I say for a shop, cotton, plain cotton, or maybe hemp. but never anything synthetic and nothing treated. I once was using a grinding to cut a piece out of the back of a computer cabinet (I was on way to work, had forgotten to do the night before) and was wearing my slacks. standard khaki type, semi-casual/dress, stain repellant and wrinkle free. Wasn't wearing a shop apron as was a fast deal and I thought I'd be out the door. I feel heat on my crotch, figure it's from some of the sparks coming my way. I look down, the crotch of my pants was on fire!!!!!!! I quickly tapped it out with my hand, my underwear underneath were black and my nuts were uncomfortable all day even though they were only red. very close call. Since then I've always worn jeans or my cotton dickies.
Now I'll wear the welding jacket too.
Red
all shirts were cotton not oil covered and were clean. i was not washing any thing in the shop to get on the shirts. like honing oil.that welding job was the first job of the day and the last followed by many fun days till i had skin back were it needed to be .its all behind me i care not to think much about it now . looking at the shirts it seams the t shirt may have lit off first . i was not welding long 2 minutes max .i can say after going threw this you can not put your self out fast enough
Just a tip to those that are running out to buy welding jackets shirts what ever... I have one and wear it all the time. It keeps sparks and chunks of weld from burning you... ON the bad news if a spark or somthing goes down the sleve it will not burn through and fall to floor it WILL stay there and burn you.:eek::eek: You just have to be carful safety equipment is only good so far. Sorry to hear of this happening to anyone.. I had 2 friends die from the burns of a welding accident.
Quote:
Originally Posted by Dago Red
Red.......Holy Crow!!!!!!!!!.:eek:
While not even in the same league with Pat, I had a little incident over the weekend.
I was welding up the new exhaust on Jeff's camaro welding a seam over the rear end. What I thought was a spark fell on my stomach. I figured no big deal, I'm wearing a jacket, it won't be a problem. Turns out it was bigger than I thought. It landed on the zipper of my jacket. It wasn't a problem for a few seconds but then all of a sudden OUCH. The "big spark" had melted through the zipper, but not before heating up and melting loose 6-8 zipper teeth. So now I have several hot objects everywhere inside my jacket because I'm squirming around doing damage control. Now I have a shirt (and stomach) that looks like it was shot by a little shotgun @ close range. :HMMM:
Just about ready to settle back down on the creeper to continue welding and got zapped again in the back by a few persistent pieces that were still hot enough to make a second mark.
Again, nothing like Pat went through, but his ordeal was the first thing I thought of as I began to smolder.
The old jacket was no big deal, it was about shot anyway. The shirt on the other hand was brand new.
Glad to hear you're back to normal, Pat, whatever normal is. As we get older, I think, God gives us these little barometers so we can keep dry or warm, or whatever; when we're young, it never seems to affect us, but as we age, we find it is much nicer to keep dry and warm - not too warm, though :eek: - , hence the reminders.
I am not so sure that it wasn't that half a man sweater that is now missing, that caught fire! :LOL:
Sorry this happened to you.
So glad you are back in the saddle...**)